SPM CNC For Facing and Centering

SPM CNC For Facing and Centering

 

Technical Features :

• Box Stand : To mount Headstock, slides, electrical, enough top floor is kept. Approximately 30 to 35 mm top base thickness to get firm rigidity. The bottom supports are not separately joint, but integral as a one piece. Because of from bottom to top one piece, vibrations will be avoided. Necessary guarding are provided.
• Headstock :Fabricated /  Casted, having hardened and ground spindle. Spindle

Nose is capable to hold various collets and cutter arbour  , suitable to your requirement. There are 2 head stocks with 2 spindles for Facing and centering operation. Each head stock having separate motors with required HP/KW.

• Base and Slides :Fabricated / Casted with LM Guide ways and blocks on which the head stocks will be mounted and on Main slide component mounting fixture arrangement will be done. Also above all slides will move by servo motors mounted on Ball screws. will move (RAPID + FEED) forward .
• Hydraulics : Hydraulics of reputed makes like Dowty pumps, Polyhydron valves, Yuken make solenoids are to be used.
• Feed : With cutting speed 200 to 400 meters/min, depending upon the type of cutting inserts used.