MANUFACTURERS
Call On
V.I. Trivedi
94262 50972
|
MAIN SPINDLE |
||
|
Sr. no. |
Details |
Specifications |
|
01 |
Spigot OD |
Dia. 50 and M10 hls |
|
02 |
Suitable to the U-Drills |
Dia. 39 and 55 |
|
03 |
Spindle RPM |
1200(max.) |
|
04 |
Spindle Drive Servo Motor |
37 KW |
|
05 |
Spindle Traverse |
150 mm |
|
06 |
Max Torque |
11 kgf.m 107.8 N.m |
|
07 |
Thrust Load |
526 kgf 5160 N |
|
08 |
Y-axis travel with head stock |
460 mm |
|
09 |
Y- feed ball screw servo motor |
3 KW |
|
10 |
Y-axis travel feed |
1000 mm/min (max.) |
|
11 |
Z-axis spindle travel feed |
0 to 1000 mm/min. |
TABLE-2
|
JOB MOUNTING TABLE |
||
|
Sr. no. |
Parts |
Specifications |
|
01 |
Bottom Fixed Round Table |
OD=4000mm, ID=3160mm With THK circular Rails and blocks. |
|
02 |
Top Indexing Round Table |
OD=4300mm, ID=3160 mm With job holding fixture mounting spigot (1) 72mm wide 15mm deep on 3864mm center. (2) 72mm wide 15mm deep on 3318 center (3) M8, ID=4200mm, No. of teeth=552 gear mounting spigot |
|
03 |
Indexing table drive servo motor |
6 KW |
|
04 |
Indexing table circular RPM |
0.25 |
TABLE-3
JOBS AND OPERATIONAL SPECIFICATIONS Sr. no. PCD(mm) No. of holes Drill size (mm) Drill length(mm) Component Name 01 4040 80 45 60 Base Flange-5 02 3825 80 45 60 As above 03 3872 150 39 85 Middle Flange-3 04 3856 112 45 110 Middle Flange-4 05 3876 128 39 60 Middle Flange-2 06 3874 116 39 65 Middle Flange-3 07 3860 96 45 85 Middle Flange-4 08 3885 72 39 60 Middle Flange-2 09 3724 132 39 80 Middle Flange-3 10 3248 100 39 70 Middle Flange-2 11 4010 72 39 60 Base Flange
TABLE-4
|
GENERAL SPECIFICATIONS |
||
|
Sr. no. |
Details |
Specifications |
|
01 |
Pillar to Pillar Center Distance |
5340 mm |
|
02 |
Pillar to Resting Pillar Distance |
1550 mm |
|
03 |
Mail Pillar arm mounting OD |
200 mm |
|
04 |
Total Height of machine |
2200 mm |
|
05 |
Over all dimensions of machine |
5800 X 5800 X 2200 mm^3 |
|
06 |
Total Weight of Machine |
53000 KGS. (Aprox.) |
|
07 |
Coolant pressure |
40 bar |
SALIENT FEATURES OF MACHINE:
(1) Through-spindle coolant via an auxiliary pump that Supplies coolant at up to 40 bar pressure to the Cutting edge, this improves Tool Life and allows Higher speeds, This pressure throws chips from the Drilling hole and the result is high productivity and Reduce cycle time.
(2) All 4 heads will be controlled by one operating system.
(3) Also multi function Jog Handle (remote) for setting individual heads
Function.
(4)